by Bill Genc | Jan 29, 2018 | MillTurn U3000 Programming
In the sixth video of this 25-video series on programming a Multus U3000 with TopSolid, we will finish turn select faces. I return to my B axis of 45 degrees, reuse previously created feeds and speeds setting and do a final check using the simulation tool and I learn...
by Bill Genc | Aug 11, 2017 | MillTurn U3000 Programming
Using the U3000 B-Axis to turn with In the third video of this 25-video series on programming a Multus U3000 with TopSolid, you will learn how to use the B-Axis of the Multus U3000 to continue roughing the part. As always, you will begin by selecting the geometry to...
by Bill Genc | Aug 7, 2017 | MillTurn U3000 Programming
Create your First U3000 Tool Path In the second video of this 25-video series on programming a Multus U3000 with TopSolid, you will learn how to use the lower turret of the Multus U3000 to turn down the front face of the part. To do this, you will start by selecting...
by Bill Genc | May 30, 2017 | MillTurn U3000 Programming
Start with Machine Part Setup In the first video of this 25-video series on programming a Multus U3000 with TopSolid, you will learn how to get started in TopSolid. You will start by opening the part to machine. From there, you will add this part to a Machine Part...