by Bill Genc | Apr 4, 2018 | MillTurn U3000 Programming
Within this final video of the 25-video series on programming a Multus U3000 with TopSolid, the last Op 1 feature we need to program are radial tip drillings. I first establish my drill settings just like I would for any other drilling. But, there are a number of...
by Bill Genc | Apr 2, 2018 | Featured, MillTurn U3000 Programming
Within the twenty-fourth video of this 25-video series on programming a Multus U3000 with TopSolid, I will show you the work I did to finish the remaining Op1 features. To avoid asking you to sit through too much repetition, I took a few minutes and finished...
by Bill Genc | Mar 28, 2018 | MillTurn U3000 Programming
Within the twenty-third video of this 25-video series on programming a Multus U3000 with TopSolid, we will finish side milling our open pockets. After making the needed settings adjustments to establish a proper angular solution, you will notice that TopSolid wants to...
by Bill Genc | Mar 26, 2018 | MillTurn U3000 Programming
Within the twenty-second video of this 25-video series on programming a Multus U3000 with TopSolid, I demonstrate how much time you can save programming ID drillings when a WCS repetition (work coordinate system) is established for a given position. You will notice...
by Bill Genc | Mar 21, 2018 | MillTurn U3000 Programming
Within the twenty-first video of this 25-video series on programming a Multus U3000 with TopSolid, I will demonstrate how easy it is to create a WCS repetition (work coordinate system) that will save you a great deal of time programming your parts. TopSolid makes it...
by Bill Genc | Mar 19, 2018 | MillTurn U3000 Programming
Within the twentieth video of this 25-video series on programming a Multus U3000 with TopSolid, we will explore how TopSolid finds multiple angular solutions for our ID milling operation. I start by selecting the detail we want to work on and notice right way that the...
